Somebody updated a very old diagram, as I chuckled when I saw the cell phone charger referenced. Who had business band radio back then in a passenger car? Even CB radios were not popular.
There is an entire subreddit dedicated solely to vehicular EDC, with plenty of over-the-top examples in true internet form: https://old.reddit.com/r/VEDC/
New plans added on 11/22: Click here for 2,593 plans for homemade tools.
nova_robotics (Jan 17, 2023), ranald (Jan 24, 2023), rlm98253 (Jan 17, 2023), tuchie (Jan 22, 2023)
WorkerB (Jan 23, 2023)
We had that 1966 blizzard in SD too. Looked about the same way there. Steel grain scoops were the order of the day. We shoveled coal for the furnace with ours. Aluminum ones were too expensive. In 1983 when we got our first house I splurged and bought an aluminum scoop. I knew it would wear out on the concrete driveway so I bolted a steel cutting edge to the bottom. (I didn't know about cutting edges on heavy equipment until later). Over the years I have replaced that edge twice but the scoop still looks new. It has outlasted two plastic scoops.
Do not carry cat litter (kitty litter shown in the trunk of the 69 Dodge Charger) as a friction surface 'improver'. It is made from bentonite clay. When wet it is a super slippery surface. When people spin their tires on snow and ice, it melts it, resulting in a water film that has near zero friction coefficient. Clay is not going to make that better.
They have bags of sand for just this purpose at my home supply. Also sand box sand in plastic bags is the same thing. For some the extra weight in the rear of their car is an added bonus. Pickup trucks with no load are dangerous on the road as they spin their tires, and drift all over the roadway.
I've never had good traction from Mud and Snow rated tires, as they are still passenger type. So I have a change out of wheels with real snow and ice tires mounted. I've had good luck with the Firestone Winterforce brand, but my current autos are using Sumitomo Ice Edge, they are affordable and make all the difference in winter operating on compacted snow and ice. We get freezing rain during some parts of the winter here. I much prefer it just staying too damn cold for that, where I grew up in ND, it was too cold to use salt to remove ice, which was good for the auto rust wise.
The other difficulty is driving in non compacted snow, and the wider the tire is, the less friction as they 'float' on top the fresh snow, vs. a narrow tire that cuts through the snow, i.e. plows it out of the way. So I look for the narrowest tire possible when purchasing snow tires, which also helps in hydroplaning on water.
There are currently 2 users browsing this thread. (0 members and 2 guests)
Bookmarks