Simple manual bending setup

**DIYer** · Nov 17, 2017, 07:44 AM

Thanks Tuomas! We've added your Bar Bender to our Metalworking category,
as well as to your builder page: Tuomas's Homemade Tools. Your receipt:

Bar Bender by Tuomas

tags: bender

**retiredpd64** · Nov 17, 2017, 07:48 AM

great bender

**Tuomas** · Nov 18, 2017, 10:48 AM

Some pictures to show the scrolling.

**Gary A. Wills** · Nov 19, 2017, 11:56 PM

Thanks I like it , if and when I'm able it will be a go in my shop. Being bed bound for two years really sucks big time, waiting to see Dr ad getting spinal surgery .

**Tuomas** · Nov 20, 2017, 05:44 AM

Originally Posted by Gary A. Wills

Thanks I like it , if and when I'm able it will be a go in my shop. Being bed bound for two years really sucks big time, waiting to see Dr ad getting spinal surgery .

Thank you! I hope all the best for you. I can only imagine how you feel. Get well soon!

**ncollar** · Apr 16, 2018, 09:25 PM

Tuomas
Wonderful idea, one question, You have four sectors is 1 at the .250 inch mark, 1 at the .500 inch mark, 1 at the .750 inch mark and the forth at 1 inch marks. A very nice build and I think I can put it on one of the corners of my welding table. It would take a lot to move it.
Thank you Tuomas
Nelson

**Tuomas** · Apr 17, 2018, 02:32 AM

Originally Posted by ncollar

Tuomas
Wonderful idea, one question, You have four sectors is 1 at the .250 inch mark, 1 at the .500 inch mark, 1 at the .750 inch mark and the forth at 1 inch marks. A very nice build and I think I can put it on one of the corners of my welding table. It would take a lot to move it.
Thank you Tuomas
Nelson

I am metric guy.

I used 16mm axle. I placed holes increasing leght of radius with 2 x axle diameter = 32mm that's somewhat 1 1/2" First hole is 64mm from the centerpoint. About 2 1/2"