Silver soldering toolmakers clamps

[thehomeengineer]

Hi All

Not the most interesting of tools but very useful when silver soldering components (or soft soldering, Welding etc.) that otherwise would be difficult to hold or setup.

The two clamps are made from mild steel and are very simple to make. The clamp head can be rotated as well as being raised or lowered with simple cranked hand tight locks, into the desired position to hold the workpiece.

The last component I used the clamps for was a top hat plunger which was quite small, the clamp made the process very simple.

Using both clamps I have supported larger components to complete soldered joints.

The photos will hopefully help the description:

Two clamps on hearth.

Single clamp holding fluxed components to be silver soldered

Completed job

Solder joint

Top hat plunger cleaned up and finished.

Thank you for viewing
The Home Engineer

[DIYer]

Thanks thehomeengineer! We've added your Silver Soldering Clamps to our Clamps category,
as well as to your builder page: thehomeengineer's Homemade Tools. Your receipt:

Silver Soldering Clamps by thehomeengineer

tags: clamp