Sensitive Drilling Platform with plans

[jjr2001]

Marv Klotz (mklotz) has an excellent article about drilling with tiny drill bits.
I use these small bits on occasion but not all that often. Tiny Carbide drills are quite brittle and I have been known to break a few!
Here is Marv's Posting: Sensitive drilling platform

After reading Marv's article I wanted to build one for myself and that is what this posting is about.
Complete prints are included for my version of Marv's excellent Sensitive Drilling Table.
The completed drilling table has a throw of about .750" which should be more than enough for most
sensitive drilling. I included a table anti rotation pin and that is the main difference between
my table and Marv's. I did not use ball bearings on the pushrod either. Thanks for the Idea Marv.

[mklotz]

Imitation is the sincerest form of flattery. Thanks for the kind words. I'm very pleased that you liked the design enough to build one for yourself.

BTW, you'll be happy to know that a table anti-rotation mechanism for my version is nearing the top of the project list. I encourage future builders to include one in their copies of the design.

[jjr2001]

Thanks Marv, I find a lot of my tool build ideas from the many posters on HMT.
This is a great place to find machining information.
Cheers, JR

[DIYer]

Thanks jjr2001! We've added your Sensitive Drilling Platform to our Drilling and Drill Presses category,
as well as to your builder page: jjr2001's Homemade Tools. Your receipt:

Sensitive Drilling Platform by jjr2001

tags: stand, drilling

[uv8452]

What about adding a depth scale? Perhaps on the circumference of the excentric? The difference between circumference and sinus would not matter. I would make the scale adjustable.

[jjr2001]

Thanks for the tip uv8452, that is a good idea and could be quite handy in some applicatioons.
Cheers, JR

[Jon]

Congratulations jjr2001 - your Sensitive Drilling Platform is the Homemade Tool of the Month for November 2024!

Not only is this a really nice build, but the added plans make it easier for others to replicate and advance yours and mklotz's designs. It will be interesting to see how the next builder evolves this tool.

Some more good builds from November:

Powered Knee Lift by tonyfoale
Mill Splash Guard by albertq
Vise V-Blocks by Alans Home Workshop
12V Hydraulic Power Unit by Made in Garage
Screw Cutting Fixture by Doug Thompson Metalcraft
Linear Actuator by Made in Garage
Silent Air Compressor by Mr.DK DIY
Flip Up Tool Holder by jjr2001
Dial Indicator Holder by jjr2001
Bolt Holding Adaptors by jjr2001
Bead Roller by jwitkowski
Tweezers by Philip Davies
Diverter Valve Mounting Plates by thehomeengineer
Lock Down Vise by jjr2001
Bolt Modification Fixture by jjr2001
Soft Hammers by Doug Thompson Metalcraft
Hydraulic Ram Security Lock by thehomeengineer
Square Stock Holding Method by Alans Home Workshop
Welding Clamp Adaptor by Don42
Mill Motor Replacement by Improvised DIY
Lathe Face Plate by Improvised DIY
Adjustable Clamp by orioncons36
5C Collet Bushing by Mook
Work Stop by jjr2001
Automatic Feeder by Mr.DK DIY
Friction Drive Speed Indicator by winkys workshop
Drill Press Friction Drive by winkys workshop
Lathe Wipers by zzy9903
Miter Clamping Jig by Make Things
Clamp On Towing Bracket by thehomeengineer
Repeatable Depth Stop by Mook
Tool and Cutter Grinder Attachment by Improvised DIY


jjr2001 - You'll be receiving a $250 cash prize, in your choice of Amazon, PayPal, or bitcoin. Please PM me your current email address and prize choice and I'll get it sent over right away.

And, you'll now notice the four-column award in the awards showcase in your postbit, visible beneath your username:



Nice work

[mklotz]

Way to go, JJR. Congratulations.