Inside a wind turbine during high winds - GIF

[ToolTalkBot]

Inside a wind turbine during high winds.




Previously:

Bladeless wind turbine - GIF
Fatigue testing wind turbine blade - GIF
Flat packing a wind turbine - GIF
Wind turbine blade counterweight - GIF
Wind turbine blade wire saw - GIF
Wind turbine explosion - GIF
Wind turbine nacelle transport - photo
Wind turbine that folds down for maintenance access - GIF

[BuffaloJohn]

No thanks!!!

[Frank S]

I cha hear one of my old iron worker buddies now , Just jam a sleever bar in there then when the other side comes around stab it with your spud get this thing bolted up there's cold beer's waiting

[Bony]

Why is the tower bending so much yet the tower next to it, a crane?, so steady?

[schuylergrace]

Why on Earth would they be trying to assemble that thing in such horrible conditions? They certainly wouldn't operate it in that kind of weather.

[Frank S]

Why on Earth would they be trying to assemble that thing in such horrible conditions? They certainly wouldn't operate it in that kind of weather.

The wind may have been dead calm at the beginning of the lift. This could just be a short period of gusts. The nacelle is already above the mounting point, the reason why the turbine tower is swaying is because of its surface area. no matter which direction the wind blows the cylinder is still going to be a huge sail in the wind. the lattice tower of the crane not as much by comparison. the Nacelle would rotate on the hook to present the least amount of wind exposure. At this point about all they can do is wait it out gusts of wind unless accompanied by storms or atmospheric pressure fronts are usually short lived. Once they do manage to stab the bolt holes with their bars or spuds the weight of the nacelle will have a dampening effect on the tower to an extent.
When we were installing some equipment on the Burj Khalifa we could feel that thing sway several meters on the 122nd floor while the big ugly skyscraper was still being built.