Micro mill. By Michel Uphoff. 23:39 video:
New plans added on 11/18: Click here for 2,585 plans for homemade tools.
philippacificnw (Oct 13, 2024)
New plans added on 11/18: Click here for 2,585 plans for homemade tools.
philippacificnw (Oct 13, 2024)
New plans added on 11/18: Click here for 2,585 plans for homemade tools.
cagiva (Sep 28, 2024), philippacificnw (Oct 13, 2024)
New plans added on 11/18: Click here for 2,585 plans for homemade tools.
philippacificnw (Oct 13, 2024)
New plans added on 11/18: Click here for 2,585 plans for homemade tools.
philippacificnw (Oct 13, 2024)
New plans added on 11/18: Click here for 2,585 plans for homemade tools.
cagiva (Oct 19, 2024), emu roo (Oct 19, 2024), philippacificnw (Oct 23, 2024)
That swivel design is awesome!
I own a very old TAIG MICRO/MINI MILL, it was their First CNC designed UNIT. I never could learn G CODE, so I simply put home built handles on the Servos, which fortunately had a double axis design.
But I quickly learned to FORGET TRYING to angle the headstock, as you point out, the tightening would often CREATE an adjustment, and I finally trammed it perpendicular to the bed and left it that way!
Two decades later, the entire servo control box is so outdated that I would need to redesign the wiring from the old VGA monitor PLUGS, to USB", GET NEW SOFTWARE,
And all that is fine, if I was the AGE that I was when I bought it, but I will always just twist handles!
philip, from the Great Pacific NorthWET, Oregon Division
Last edited by philippacificnw; Oct 23, 2024 at 04:33 PM.
New plans added on 11/18: Click here for 2,585 plans for homemade tools.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks