Micro mill - video

[Jon]

Micro mill. By Michel Uphoff. 23:39 video:

[Jon]

Part 2. By Michel Uphoff. 21:56 video:

[Jon]

Part 3. By Michel Uphoff. 33:07 video:

[Jon]

Part 4. By Michel Uphoff. 27:03 video:

[Jon]

Part 5. By Michel Uphoff. 29:34 video:

[Jon]

Part 6. By Michel Uphoff. 27:07 video:

[philippacificnw]

That swivel design is awesome!

I own a very old TAIG MICRO/MINI MILL, it was their First CNC designed UNIT. I never could learn G CODE, so I simply put home built handles on the Servos, which fortunately had a double axis design.

But I quickly learned to FORGET TRYING to angle the headstock, as you point out, the tightening would often CREATE an adjustment, and I finally trammed it perpendicular to the bed and left it that way!

Two decades later, the entire servo control box is so outdated that I would need to redesign the wiring from the old VGA monitor PLUGS, to USB", GET NEW SOFTWARE,

And all that is fine, if I was the AGE that I was when I bought it, but I will always just twist handles!

philip, from the Great Pacific NorthWET, Oregon Division

[Jon]

Part 7. By Michel Uphoff. 21:21 video: