Accurate letter/number stamp on the Hobby Mill

[Mr. Factotum's Workshop]

Accurate letter/number stamp on the Hobby Mill Homemade fixture

[mr mikey]

Wow, so simple and a great idea. I have been kicking around ideas for stamping for a while. This ones on my list. Thanks. Mr Mikey.

[Mr. Factotum's Workshop]

thanks for the feedback, appreciated��

[Hill Top Machine Works]

Nice and simple. What did you work out for the spacing measurement?

[DIYer]

Thanks Mr. Factotum's Workshop! We've added your Stamping Method to our Miscellaneous category,
as well as to your builder page: Mr. Factotum's Workshop's Homemade Tools. Your receipt:

Stamping Method by Mr. Factotum's Workshop

tags: mill, stamp

[Jon]

Congratulations Mr. Factotum's Workshop - your Stamping Jig is the Homemade Tool of the Week!

Simple wins it this week, and this little jig looks like an excellent solution.

Some more good builds from this week:

Female Spade Connector by Frank S
Hub Nut Socket by Frank S
Tire Safety Cage by Frank S
DRO Mount by mylilmule
Chop Saw by orioncons36
Electro Etching Setup by ttmrj
Bandsaw Blade Tags by natie123
Chisel by Kovanca Polock
Slotter Tool Holder by Topper Machine
Flipping Cutting Station by thecuzdoes
Drill Press Vise by Metalgeria
Table Saw Miter Sled by Didpoolhall
Drill Press by Kwandotechnic
Router Jig by Didpoolhall

Mr. Factotum's Workshop - you'll be receiving a $25 online gift card, in your choice of Amazon, PayPal, or bitcoin. Please PM me your current email address and gift card choice and I'll get it sent over right away.

This is your 2nd Homemade Tool of the Week. Here are both of your Homemade Tool of the Week winning tools. Congrats again

Gear Cutting Method by Mr. Factotum's Workshop

tags: lathe, gears

Stamping Method by Mr. Factotum's Workshop

tags: mill, stamp

[dgbreggin]

I made a hand-held stamp alignment jig out of aluminum and put a couple magnets in it to help hold the stamp during setup. (Still have to hold it when striking, of course.)

I really like your setup for using the X travel for spacing.

[Hans Pearson]

This is a great idea, it can be adapted for any size of letter/number punch and and some simple measurements and calculations can work out the travel for each letter to get the kerning right. Well done.

[Mr. Factotum's Workshop]

This is a great idea, it can be adapted for any size of letter/number punch and and some simple measurements and calculations can work out the travel for each letter to get the kerning right. Well done.

thanks very much. appreciated