The seemingly endless journey to a CNC machine finally, well, ends

[cranktown city]

Hey y'all!

Been a long time since I last posted here, mainly due to the fact that I've only had one homemade tool in the works for the last 5 months.

But here we are, emerging on the other side of this journey, now with a fully functioning CNC laser cutter/engraver from scratch! The idea was to build a laser tube from scratch, and mount said laser tube onto a CNC machine. And after many months of poor sleeping habits, I finally got to a place where I can call this project finished.

now, full disclosure, I wound up installing a 100W sealed tube into the machine at the end of the build, for the sake of more power, but I did get the homemade tube to work enough for it to count in my book. either way, posted below is the final video, and the playlist with all the videos in the series.

Thanks!

https://www.youtube.com/playlist?lis...s-yQmOhNZkYnVW

[DIYer]

Thanks cranktown city! We've added your CNC Laser Cutter to our CNC category,
as well as to your builder page: cranktown city's Homemade Tools. Your receipt:

CNC Laser Cutter by cranktown city

tags: laser, CNC, engraver

[sams wood creations]

Thanks for your post. I'm getting ready to build my own CNC design, so I subscribed to your channel
to see if can learn some more.

[QUOTE=cranktown city;187667]Hey y'all!

Been a long time since I last posted here, mainly due to the fact that I've only had one homemade tool in the works for the last 5 months.

But here we are, emerging on the other side of this journey, now with a fully functioning CNC laser cutter/engraver from scratch! The idea was to build a laser tube from scratch, and mount said laser tube onto a CNC machine. And after many months of poor sleeping habits, I finally got to a place where I can call this project finished.

now, full disclosure, I wound up installing a 100W sealed tube into the machine at the end of the build, for the sake of more power, but I did get the homemade tube to work enough for it to count in my book. either way, posted below is the final video, and the playlist with all the videos in the series.

[nova_robotics]

That werewolf built a laser cutter!

It's a thing of beauty man, well done. I've been subscribed to your Youtube channel for a while now and it's criminally underrated at only 7.7k subscribers.