Printable View
Ruler with raised end for easy pickup.
Fullsize image: https://diqn32j8nouaz.cloudfront.net...r_fullsize.jpg
https://diqn32j8nouaz.cloudfront.net...ckup_ruler.jpg
Previously:
https://www.homemadetools.net/forum/...636#post159259
https://www.homemadetools.net/forum/...805#post156136
https://www.homemadetools.net/forum/...595#post182273
https://www.homemadetools.net/forum/...952#post156773
https://www.homemadetools.net/forum/...561#post143121
https://www.homemadetools.net/forum/...9580#post89618
now there is a feature that makes sense at the same end where the hole to hang it up is
Can that help to get your boots on as well?
This is my answer to drawing tool pickup. I use these on my fairly accurately scaled PC screen for 3d print part designing in OpenSCAD. When I first used these, I found the slightly beveled edges on the tools made them nearly impossible to remove from the screen until I put a small tab of blue painter's tape on them.
Attachment 41068
Those scales are made by a Japanese tool company. I don't think they are offered with Imperial graduations. I received one as a gift working with Japanese contractors at Tesla in Reno, NV. Used them everyday building the battery assembly line.
Same tool company has other terrific tools, popular with millwrights. A magnetic plumb bob rather like a gammon reel, magnetic protractors and the very best ball end hex Ell wrenches available. Longer than our common pattern, including a torque increaser that grips the bend, not stressing the shank like a cheater tube.
I'll post mine when I get home, if there is interest to remind me.
