QCTP knurling holder fix
.
The material used
Checking if idea will work...
"Milling=" the round slot in four jaw chuck.
Tool ready for test run
Done!= "Pin It")
After great results in my clamp style knurling tool and Bump straight knurling tool I was riled with the poor results I had with QCTP 110 tool (knurling and facing tool holder).
The material used
Checking if idea will work...
"Milling" the round slot in four jaw chuck.
Tool ready for test run
Done!
aphilipmarcou (Jan 24, 2018), baja (Feb 28, 2020), benkeller3 (Feb 28, 2020), blkadder (Jan 22, 2018), jjr2001 (Jan 22, 2018), Jon (Jan 22, 2018), mwmkravchenko (Jan 22, 2018), olderdan (Jan 22, 2018), Paul Jones (Jan 22, 2018), PJs (Jan 23, 2018), Seedtick (Jan 22, 2018), Sleykin (Nov 8, 2022), ta2ad (Jan 31, 2022), tonyfoale (Jan 22, 2018), Tule (Feb 28, 2020)
i have one of those terrible bump knurlers, and now i realize there is hope for it. On my build list!
Thanks!
Bob
bvd1940 (Jan 22, 2018), Cascao (Jan 22, 2018), Eaglewood (Jul 2, 2024), Paul Jones (Jan 22, 2018), t24 (Jan 22, 2018)
...or you can replace the knurls with one bearing and make a bump tool .
Thanks Cascao! We've added your Knurling Holder Modification to our Metalworking category,
as well as to your builder page: Cascao's Homemade Tools. Your receipt:
New plans added on 11/20: Click here for 2,589 plans for homemade tools.
Cascao (Jan 29, 2018)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks