Organizer na wiertła z kątownika stalowego

[Salix84]

Cześć nadal próbuje ogarnąć bałagan w warsztacie.
Teraz padło na wiertła i frezy. Zrobiłem organizer ścienny z kątownika stalowego 50/50/3 mm. Wydaje mi się, że to fajny sposób bo jest prosty do wykonania z możliwością dostosowania do swoich potrzeb. Można do projektu wykorzystać większy lub mniejszy kątownik wiercić pojedyncze i podwójne otwory itp. według uznania. Ja zrobiłem sobie na razie dwa jeden na frezy drugi na wiertła od fi 3 do fi 9,9.
Pozdrawiam i do kolejnego filmu

[Jon]

Thanks Salix84! We've added your Drill Bit Organizer to our Storage and Organization category,
as well as to your builder page: Salix84's Homemade Tools. Your receipt:

Drill Bit Organizer by Salix84

tags: drill bit, storage

[Drew1966]

What language is this please?

[mklotz]

What language is this please?

If you put it into Google translate and select "detect language", you'll not only get a translation but it will report "Polish detected" as the language.

[Toolmaker51]

Excellent concept Salix84.
Everybody worries commonly about floor space for equipment and storage; sometimes neglecting/ under-utilizing walls and cubic space.

[Drew1966]

If you put it into Google translate and select "detect language", you'll not only get a translation but it will report "Polish detected" as the language.

Yew Bewdy! Thanks mate.

[mklotz]

Excellent concept Salix84.
Everybody worries commonly about floor space for equipment and storage; sometimes neglecting/ under-utilizing walls and cubic space.

If you share a garage shop with a vehicle, don't overlook the space under the vehicle for storage...

Lengths of stock, seldom used hoses or extension cords, etc.

Of course, if you must remove the vehicle to work in the shop (as I do), you may want to use only part of the under vehicle space for storage so some is left to allow for rolling tool chests/saws/sanders/etc about when you work.

[jdurand]

One positive thing about the architect dictating that we have tall ceilings it it will give us more storage space. Probably don't want to put the heavy steel stocks up there, but lots of stuff can be on shelves. We figure each floor of the house will have a nice stepladder, we've ordered one to be there when we move in.

I know the locals think we're strange, but things like the kitchen cabinets will go to the ceiling, one row of standard sized ones with a second row filling the normally dust collecting space up to the ceiling. So we need a step ladder, that's where the holiday stuff and other needed but seldom used items go.

[79cvx20]

I have found many great ideas for storing drill bits but have not found a way to label or Mark each size. I would like to print them out on paper stickers.

[Toolmaker51]

I have found many great ideas for storing drill bits but have not found a way to label or Mark each size. I would like to print them out on paper stickers.

There are many sizes of adhesive address labels, programming page might (will) be tedious, but ease tasks later on having applicable fractional/ letter/ number, decimal & metric equivalent.
If it was I, would be standard paper, held on with adhesive tape instead. Fold one end under, much easier to remove. There are standard perforated labels too, such as fit inside tabs on file folders. Dollar store best item; not too sticky tape, i.e. NOT 3M grade...