Organizer na wiertła z kątownika stalowego

[mklotz]

Let somebody else do the labeling. Buy one of these...

https://www.amazon.com/Stainless-0-0...76&sr=8-5&th=1

and build a drill stand around it.

If you have to deal with the full spectrum of idiocy of inferial drill nomenclature, you'll save a lot of time and frustration by buying one of these...

https://www.amazon.com/Huot-11700-Co...76&sr=8-8&th=1

or cheap out and get these...

https://www.amazon.com/Big-Horn-1925...s%2C179&sr=8-8

and build your own version.

[Toolmaker51]

Let somebody else do the labeling. Buy one of these...

https://www.amazon.com/Stainless-0-0...76&sr=8-5&th=1

and build a drill stand around it.

If you have to deal with the full spectrum of idiocy of inferial drill nomenclature, you'll save a lot of time and frustration by buying one of these...

https://www.amazon.com/Huot-11700-Co...76&sr=8-8&th=1

or cheap out and get these...

https://www.amazon.com/Big-Horn-1925...s%2C179&sr=8-8

and build your own version.

Those are options worth considering.
Regarding a box index, such as https://www.amazon.com/Huot-11700-Co...76&sr=8-8&th=1 above, the drawer style drill indexes leave much to be desired.
Worst feature, as bits get smaller, the difficultly to pull one out increases. The troughs shorten, and too narrow for a finger tip.

[hemmjo]

Enter the sizes into a database application like you might use to print address labels. Then set that to print on common self-stick mailing labels.