Stevo,
here is an example of a yoke curve turning attachment.
Here is my not yoke interpretation:
Single piece, simple ball turner.
Stevo,
here is an example of a yoke curve turning attachment.
Here is my not yoke interpretation:
Single piece, simple ball turner.
Home-PC (Jun 7, 2021), old_toolmaker (Jun 12, 2021)
Thanks Tony for your link, I now know what a yoke is, no yoke haha. I'm still yet to come across any vids of the yoke system doing what I need that is doming the inside of my container lids. My tool can comfortably do 15mm radius up to about 60mm (if I dare) without hitting the chuck Jaws. I feel the yoke systems I've seen couldn't do this as well as what I've designed, best regards stevo
Stevo,
The yoke in the picture can do concave and convex. For concave you just swing the tool holder part out 180 deg. However, like you I am not over impressed by the yoke type. I think there are videos on the net showing concave machining but generally for making pipe bending formers not domes.
BTW. I will not be using my ball turner in the future. I have programmed convex and concave machining into my lathe conversion.
Screwing without screwing up.
Last edited by tonyfoale; Jun 6, 2021 at 01:18 AM.
Home-PC (Jun 7, 2021), old_toolmaker (Jun 12, 2021)
Congratulations Stevohdee - your Internal Dome Tool is the Homemade Tool of the Week!
This was a difficult week to win, but this is a great video and a clever tool built with even more homemade tools.
Some more nice tools from this week:
Jib Crane by Frank S
Kill Switch Extension Cord by Tuomas
Ball Screw and Electronic Lathe Conversion by tonyfoale
Scaffolding and Crane by bouboulas
Door Stop by diyfixman
Wood Dent Removal Method by diyfixman
Belt Sander Dust Collector by tonyfoale
Angle Grinder Mount by orioncons36
Milling Machine Stock Support by tmate3
Drill Press Table Extensions by Didpoolhall
Stevohdee - We've added your tool entry to our All Homemade Tool of the Week winners post, and you'll be receiving a $25 online gift card, in your choice of Amazon, PayPal, or bitcoin. Please PM me your current email address and award choice and I'll get it sent over right away.
More importantly, this is your 10th Homemade Tool of the Week win! I've just added the golden wrench-on-pedestal graphic to the awards showcase in your postbit, visible underneath your avatar.
You join these six other 10-time winners: rossbotics, Christophe Mineau, mklotz, Vyacheslav.Nevolya, Tuomas, and tonyfoale. Congratulations again and good job
Here are all 10 of your Homemade Tool of the Week winning tools:
Last edited by Jon; Nov 25, 2022 at 12:58 PM.
New plans added on 12/16/2024: Click here for 2,633 plans for homemade tools.
old_toolmaker (Jun 12, 2021)
old_toolmaker (Jun 13, 2021)
old_toolmaker (Jun 12, 2021)
Nowhere near as precise, but with a cool surface finish, we took an angle grinder and mounted it to the tool post "on edge". When we turned it on and moved in (slowly) it gave a beautiful radius grind with sweet swirly patterns. Not much in the way of adjustment besides wear, but cool and radius-y as well. I like yours better for the adjustability of it. Cool!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks