Micrometer hammer - photos

[Altair]

Micrometer hammer.

Fullsize image: https://diqn32j8nouaz.cloudfront.net...r_fullsize.jpg


Fullsize image: https://diqn32j8nouaz.cloudfront.net...1_fullsize.jpg



Previously:

Micrometer mug - photo
Giant micrometer tombstone - photo
Calipers and micrometer Soviet Union flag - image
Giant micrometer - GIF
Double micrometer - photo
Braille micrometer for blind machinists - photos

[NortonDommi]

Might be a bit hard to hit a nail straight with the anvils out of alignment.

[Frank S]

Might be a bit hard to hit a nail straight with the anvils out of alignment.

Probably the reason why it was made into a hammer was because it sucked as a "C" clamp

[TrickieDickie]

agree, judging the misalignment of the spindle and anvil it has long since lost its original purpose.....I just couldnt do that to a micrometer

[Chazz]

I don't know, even though I have a lot of task-specific, small hammers, I don't have a true precision hammer.

[Moldyjim]

I like to use one of my POS mics for a small C clamp, am I a bad person?

I am thinking an inside mic would be a better precision hammer head.
Not as identifiable as sacrilegious behavior though...

[Moldyjim]

I don't know, even though I have a lot of task-specific, small hammers, I don't have a true precision hammer.

You can never have enough hammers or clamps!

[Chazz]

I like to use one of my POS mics for a small C clamp, am I a bad person?

I am thinking an inside mic would be a better precision hammer head.
Not as identifiable as sacrilegious behavior though...

I agree that would result in a better appearing precision hammer, but not as practical as the striking faces would not be flat. Also, it would be limited to indoor (inside) use. use

[nova_robotics]

This pains me.

[suther51]

Hmm, anvils misaligned, nope, it is an adjustable wrench, faces way too small to be of any use as a hammer to the type of person who abuses tools so badly.