How the last guy tightened it - GIF

[Jon]

How the last guy tightened it.




Previously:

Can't be tight if it's a liquid - meme
Using a strap for tightening fasteners - video

[jimfols]

Never met the person, but have done some rework of his jobs.

[MIGuy]

Yep, that sucker ain't comin' off anytime soon!

[greyhoundollie]

They cut the video off before he was finished.

Next he hopped of the lift and yelled, "quick hand me the stick welder and a whole box of rods!"

[old kodger]

no bloody wonder the handle on the wrench is bent

[Elizabeth Greene]

You have to wonder how the guys at the Jiffy-Lube get that front-end loader down in the pit under the cars?

[C Tucker]

You have to wonder how the guys at the Jiffy-Lube get that front-end loader down in the pit under the cars?

LOL! That would be something to see.

[C Tucker]

This reminds of a time we needed to get the nozzle off an injection molding machine. We put the biggest pipe wrench we could find on it, and hooked to the overhead hoist. Tuned the heat on for a while on the barrel , then started lifting with the hoist. When the whole machine started to get light on the back side, I smacked the end of the nozzle with a sledge and you'd have thought a cannon went off.
The operator had been using a brass rod to break up a bridge in the hopper and got a piece broken off by the screw, plugging the nozzle.

[Scotsman Hosie]

Pity the poor dumb bastard that has to get that off again.

[Jon]