Homemade Electro Etcher and Wand...

**blkadder** · Mar 27, 2018, 12:52 PM

Here are the two links I put up before. They seem to work for me, I hope this is what you were looking for.
COUSTIL - Forge / Coutellerie / Bladesmithing
Electro-Etcher Information & Wiring Schematic

**Ralphxyz** · Mar 27, 2018, 03:59 PM

Thanks they worked for me this time.

Ralph

**aussie** · Mar 28, 2018, 02:06 PM

Originally Posted by GBrackett

Attachment 2817

Attachment 2818

Built this electro etcher which I use for marking my custom made knives and other projects. Plans are available for free on my website. The parts can be sourced from Radio Shack or the web.

Thank you very much George. Simple to follow making one today!

**Frank S** · Mar 28, 2018, 07:41 PM

this will get you to his web site
G. Brackett, Bladesmith / TacticallySharp... Then click on the info & link button the plans will be the first on the list I think

**Karl_H** · Jun 4, 2020, 07:24 PM

Looks like your domain host is having some problems.
I'll keep trying since this looks like a nice project to work on.

Karl

**aussie** · Jun 4, 2020, 07:34 PM

If you have an old phone charger or the like you can use this by cutting it out and tapping off before the bridge rectifier for the AC "darkening" and just use the normal outlet for the etching outlet. This can be put in the case with a 10 amp fuse and a switch connected into the wire supplying the unit. A three way switch can be used to toggle the outlet wiring to suitable jacks.

**duckie** · Jun 4, 2020, 10:24 PM

An interesting build.

**lodola235** · Jun 5, 2020, 02:07 AM

Hi, could i also have the plans please, can't find your webb site
thanks in advance

**tooly** · Jun 7, 2020, 07:20 PM

The link to your web site says it is not connected to a website yet??

**Ralphxyz** · Jan 25, 2023, 08:55 PM

George the Link you provided gets a error message "Looks Like This Domain Isn't
Connected To A Website Yet!" I would like to have the link to your Electro Etcher!
Ralph