Fully Automatic Table Saw Build

[Bellevue Woodshop]

After 10 years of service my first table saw build had to be put to rest.
For years I have been salvaging parts, and spinning the idea in my head of a full auto table saw.
4 months ago I was able to start the work.
I have no idea how many hours I put into it, but it has to be at least 200+ hrs.

I have an article on my website with lots of detailed images and information.

https://bellevuewoodshop.com/

Just released a video of it on YouTube as well:

[DIYer]

Thanks Bellevue Woodshop! We've added your Automatic Table Saw to our Table Saws category,
as well as to your builder page: Bellevue Woodshop's Homemade Tools. Your receipt:

Automatic Table Saw by Bellevue Woodshop

tags: table saw, electronics

[Paul Jones]

Amazing! Thank you for your video. You should market this.

[Bellevue Woodshop]

Amazing! Thank you for your video. You should market this.

Thank you Paul.

There are a lot of fantastic commercially saws available on the market.
This was a project made more to see if it was possible to do....and I needed a new saw....and of course I had all the parts laying around.

Thanks for watching man.
Best reg
Roy

[Beserkleyboy]

Just WOW! Thanks very much for the opportunity to share your build...truly awesome. Cheers

Jim in Sth Coast NSW, AUS...self isolating with my 35 yr old Wadkin copy 12" panel saw...

[Bellevue Woodshop]

Just WOW! Thanks very much for the opportunity to share your build...truly awesome. Cheers

Jim in Sth Coast NSW, AUS...self isolating with my 35 yr old Wadkin copy 12" panel saw...

Thanks a lot Jim

[Jon]

Congratulations Bellevue Woodshop - your Automatic Table Saw is the Homemade Tool of the Week!

Woodworking tool builders have a difficult challenge on this forum, because they have to compete with metalworkers and machinists. Nevertheless, you made a great tool here, on a very busy week with many other excellent tools.

Some more nice picks from this week:

Grinding and Cutting Vise by Tuomas
Tube Squeezer by rgsparber
Roller Bender by Sam's Workshop Diary
C Clamp Speed Drive by rgsparber
Tube Squeeezer by IntheGroove
Ziploc Bag Vacuum Sealing Method by rgsparber
Document Scanning Setup by tonyfoale
GPS Data Converter by rgsparber
Radius Forming Jig by bobs409
Painting Hangers by garage nut
Bullet Puller by garage nut
Radius Sanding Jig by Unisawyer
Tube Squeezer by Philip Davies
Hex Drive Chuck by rgsparber
Tool Grinding Setup by celsoari
Workshop Expansion by kess
Belt Grinder Contact Wheel Modification by bobs409
Bandsaw Speed Handle by Captainleeward
Bandsaw Modifications by Canobi
Chipped Cutter Restoration by Stevohdee
CNC Lathe Chuck Fixed Base by Salix84
Machinists Mini Jacks by bouboulas
Forge by Es Welding


Bellevue Woodshop - we've added your tool entry to our All Homemade Tool of the Week winners post. You'll be receiving a $25 online gift card, in your choice of Amazon, PayPal, or bitcoin. Please PM me your current email address and gift card choice and I'll get it sent over right away.

More importantly - this is your 3rd Homemade Tool of the Week win! You join these other 3-Time Homemade Tool of the Week winners: rgsparber, rossbotics, mr95gst, Paul Jones, Christophe Mineau, Captainleeward, immortalx, scorch, Brendon, Frank S, mklotz, Vyacheslav.Nevolya, brianhw, kess, LMMasterMariner, jjr2001, Tuomas, olderdan, tonyfoale, bobs409, Mikhandmaker, thehomeengineer, old_toolmaker, Stevohdee, and Mark Presling.

You'll notice the 3-Time Homemade Tool of the Week award trophy graphic in your postbit beneath your avatar.




Here are all of your Homemade Tool of the Week winning tools:

Automatic Miter Saw Stop by Bellevue Woodshop

tags: saw, CNC, miter, stop

CNC by Bellevue Woodshop

tags: CNC

Automatic Table Saw by Bellevue Woodshop

tags: table saw, electronics

[Bellevue Woodshop]

WOW, thank you so much for this award Jon, it is greatly appreciated. And thanks to all who read the post, and checked it out.

I have some more ideas and projects on the way

Best Regards
Roy