Fired bullet shape comparisons - photo

Fired bullet shape comparisons.

Fullsize image: https://diqn32j8nouaz.cloudfront.net...s_fullsize.jpg

https://diqn32j8nouaz.cloudfront.net...omparisons.jpg


Previously:

https://www.homemadetools.net/forum/...002#post125307
https://www.homemadetools.net/forum/...107#post125853

Cutaways of various rounds.

Fullsize image: https://diqn32j8nouaz.cloudfront.net...f_fullsize.jpg

https://diqn32j8nouaz.cloudfront.net...ut_in_half.jpg

Any info on their respective velocity, penetration depth and target medium density?

Any info on each of these rounds ?

Second from left could be .30-06, the next looks a lot like .303 British, not sure about the rest.

Probably so called ballistic putty, as it gives better(but not as "natural") expansion than 10% gelatine at 4°C.

As for cartridges:

Quote:

---

Originally Posted by CMFECTU

Left to right:

​

7.62 X 54R loaded with a FMJ lead core boat tailed bullet. EDIT: This appears to be a 8 X 56mm R given the shoulder angle and neck size. However, they are typically 2mm shorter than a 7.62X54R, and this appears to have the same overall length as what I am sure is a 7.62X 54 R in the 3rd cartridge. It is NOT a .303 british, so while rather uncommon, this seems to fit the shoulder junction and neck shapes best.
.30-06 M2 AP as evidenced by the manganese-molybdenum penetrator core encased in a thick copper jacket and a lead filled tip.
Also 7.52 X 54R loaded with a steel core in the light ball variant
A Korean or Albanian produced 7.62X39 cartridge jacketed steel core with lead tip
7.62 X 35 (300 Blackout) using an all copper exotic bullet, likely a 110 grain Lehigh Defense HV Controlled Chaos Bullet
5.56 Nato M855 cartridge, which as the designation indicates is a copper jacketed steel base bullet
9mm Luger using a solid copper bullet, likely a 125 grain Fort Scott Munitions TUI bullet.

---