Free 186 More Best Homemade Tools eBook:  
Get tool plans

User Tag List

Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: Filing rest for vise

  1. #1
    Supporting Member
    Join Date
    Oct 2019
    Location
    Germany
    Posts
    130
    Thanks
    484
    Thanked 100 Times in 36 Posts

    uv8452's Tools

    Filing rest for vise

    Filing ist not the poor man’s alternative to a mill. More often than not sawing and filing is faster than milling. Filing means better workflow - less set up - less swarf - and no razor-sharp chips. Filing is flexibility: Not every surface needs the same precision, not every surface needs the same nice appearance. And milling edges is time wasted.

    Yet the work stress is considerable. As with forging or horseback gymnastics one has no second try. Most annoying is the immanent danger of rocking the file resulting in curved or inclined sufaces. So any anti-rocking-aid is welcome.

    I have seen a number of filing rests for turned parts still clamped in the lathe chuck; to file flats or hex nuts.

    But I have never seen a filing rest for a vise. Perhaps it would be too complex to adjust.

    So I started with something simple and doable; which is - by the way - the royal road to any novelty.

    https://diqn32j8nouaz.cloudfront.net/hmt_filing_fin.pdf
    Attached Files Attached Files

    186 More Best Homemade Tools eBook

  2. The Following 16 Users Say Thank You to uv8452 For This Useful Post:

    57_210 (Jul 19, 2021), Baddog (Jul 6, 2021), Bullet500 (Jul 6, 2021), cogentia (Jul 6, 2021), DIYSwede (Jul 4, 2021), drivermark (Jul 6, 2021), fabedd (Jul 6, 2021), gumser (Jul 6, 2021), HobieDave (Jul 21, 2021), jimfols (Jul 6, 2021), johncg (Jul 6, 2021), Jon (Jul 6, 2021), kngtek (Jul 23, 2021), Moldyjim (Jul 6, 2021), nova_robotics (Jul 11, 2021), Philip Davies (Jul 6, 2021)

  3. #2
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,055
    Thanks
    793
    Thanked 1,888 Times in 1,683 Posts


    Thanks uv8452! We've added your Filing Rest to our Metalworking category,
    as well as to your builder page: uv8452's Homemade Tools. Your receipt:




    2,000+ Tool Plans

  4. #3
    Supporting Member jimfols's Avatar
    Join Date
    Sep 2015
    Location
    Ontario Calif USA
    Posts
    853
    Thanks
    2,151
    Thanked 547 Times in 288 Posts
    Having all the tools and machines to make stuff I still do a fair amount of filing.
    Especially for tuning a one-off part rather than doing a machine setup.
    I vote this as Tool of the Year.
    Jim

  5. The Following User Says Thank You to jimfols For This Useful Post:

    Philip Davies (Jul 6, 2021)

  6. #4

    Join Date
    Dec 2017
    Posts
    158
    Thanks
    100
    Thanked 30 Times in 23 Posts
    Great Idea, I can see this would be useful in a number of places.

    A multi axis mount on a bench vise would be nice to have too.


    Another advantage with filing, there is just something satisfying about a nice sharp file and a solid vise holding the work.
    At least for me. I like to do chisel work too, so I'm probably not typical.

  7. #5
    CanBeDone's Avatar
    Join Date
    Oct 2019
    Posts
    43
    Thanks
    0
    Thanked 38 Times in 18 Posts
    I use this setup to sharpen my wood chisels:
    Filing rest for vise-filingguide.jpg
    It is just a simple wooden frame, with a steel clamp to hold the chisel. This clamp can be rotated to adjust the filing angle roughly. Fine angle adjustments are done by moving the chisel forward / backward within the clamp. The angle I use for my chisels is about 25 degrees. Kitchen knives I sharpen to a bevel angle of maybe 7 degrees, using a different clamping arrangement.
    The file I use is a long stainless steel rod with a wooden handle, holding two movable clamps. The file(s) itself is diamond, with grits from 80 to 2000, plus a leather strop, available from e.g. https://www.aliexpress.com/item/1005...d81085b6b22-17.
    There is, obviously, no reason that the file needs to be diamond. Any steel file will do as readily, using clamps suitable to the file's geometry.
    In use, the major difference is that I can use (nearly) the full length of the file, I am not limiting the usable file stroke by where the vise permits me to put the roller. And, by having a larger file stroke, I file faster (more of the file clears the workpiece so that the swarf will fall off) and more accurately (there is less play in the setup to mess up the filing angle)


    Quote Originally Posted by uv8452 View Post
    So I started with something simple and doable; which is - by the way - the royal road to any novelty.
    And then you compare your own design with what others have done, and you learn to do even better . . .

    And here I have to take to task Jon and Altair, who try their utmost best to obscure where the clips they put on homemadetools.com come from. And thus, they limit the learning potential homemadetools.com provides, and its usefulness. Instead, they add lots of clutter which is, ultimately, GARBAGE.

  8. #6
    Supporting Member
    Join Date
    Oct 2019
    Location
    Germany
    Posts
    130
    Thanks
    484
    Thanked 100 Times in 36 Posts

    uv8452's Tools
    Dear CanBeDone: Some time ago I thought of a file extension too - but I overlooked the advantage of the bigger stroke. Thank you.

  9. #7
    Supporting Member
    Join Date
    Oct 2019
    Location
    Germany
    Posts
    130
    Thanks
    484
    Thanked 100 Times in 36 Posts

    uv8452's Tools
    Another advantage with filing, there is just something satisfying about a nice sharp file and a solid vise holding the work.

    Dear Moldyjim: I believe than many of us like the mystery to work with a nice sharp file and a solid vise, not to forget knife-edge square and others. While precision filing doesn't leave brain capacity, 'material removing filing' (like hatching in a drawing) helps the subconcious to solve problems.

  10. The Following User Says Thank You to uv8452 For This Useful Post:

    Moldyjim (Jul 7, 2021)

  11. #8
    Jon
    Jon is online now Jon has agreed the Seller's Terms of Service
    Administrator
    Supporting Member
    Jon's Avatar
    Join Date
    Jan 2012
    Location
    Colorado, USA
    Posts
    26,445
    Thanks
    8,100
    Thanked 40,267 Times in 11,778 Posts
    Quote Originally Posted by CanBeDone View Post
    And here I have to take to task Jon and Altair, who try their utmost best to obscure where the clips they put on homemadetools.com come from. And thus, they limit the learning potential homemadetools.com provides, and its usefulness. Instead, they add lots of clutter which is, ultimately, GARBAGE.
    Unfortunately, most of the GIFs we find are unsourced, and we find them reposted on social media like reddit, TikTok, or Imgur. If we see a source YouTube video for a GIF, we'll usually include it. Some of them are watermarked with a YT source url in the corner, and sometimes a forum member will recognize a GIF and have more info.

    My favorite this year was a collection of hundreds of Chinese industrial GIFs that I bumped into on Imgur, that you've probably seen re-posted on the forum. They were completely unsourced, and could've been Chinese propaganda for all I know, but they were a great find.

  12. #9
    Supporting Member
    Join Date
    Sep 2018
    Posts
    220
    Thanks
    4
    Thanked 45 Times in 39 Posts
    Nice idea that I hadn't thought of. But maybe that's because I normally do not file big stuff. But I filed this away ! When I went to tech school, the first class was how to use a file. And we got tested on that. So yea, at 71 I still go to the files often.

  13. #10

    Join Date
    Sep 2020
    Posts
    18
    Thanks
    2
    Thanked 9 Times in 6 Posts
    For a forum that exerts as much effort in scraping the internet for all marketable amateur ideas, I find it interesting that for three years naught has been made of Japan's propensity for elevating the use of all hand tools to a religious devotation. Case in point, what IMHO is the penultimate display of hand filing artistry:


  14. The Following User Says Thank You to gargoyle For This Useful Post:

    uv8452 (Jul 12, 2021)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •