A Fence for a Vertical Bandsaw (Two Wrongs Make a Right)

[rgsparber]

My horizontal/vertical bandsaw cuts true in the horizontal position partly because the blade is oriented correctly. In the vertical position, this orientation is not square with the table. Yet, it would be handy to put a fence against the table that is parallel to the saw cut. Here is how I did it.

If you are interested, please, click here.


Your comments are welcome. All of us are smarter than any one of us.


Thanks,

Rick

[DIYer]

Thanks rgsparber! We've added your Vertical Bandsaw Fence to our Bandsaws category,
as well as to your builder page: rgsparber's Homemade Tools. Your receipt:

Vertical Bandsaw Fence by rgsparber

tags: bandsaw, fence