Fanuc 0m LCD Upgrade

[nova_robotics]

I've been modifying/repairing/upgrading a couple of older CNC machines and this was too good not to share. If you have an older CNC machine with a dirty old CRT definitely consider this upgrade. For around $200 you can get a beautiful modern LCD and COLOR. It's a direct bolt-in replacement. The connectors mate right up, and it's only 6 screws to swap the screen. Totally worth it. My apologies for the shaky cam. Must be the DTs kicking in again.

[tonyfoale]

Definitely a case of DTs.