Hi, my new tool.
https://youtu.be/t2W_ubfRXZE
Printable View
Hi, my new tool.
https://youtu.be/t2W_ubfRXZE
Love the job.
Remember to be careful using reels with anything that draws a bit of current though
https://safety4sea.com/wp-content/up...7174557234.png
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks RCTURKA! We've added your Extension Cord Reel to our Extension Cords category,
as well as to your builder page: RCTURKA's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-extension-cord-reel"> <img src="/uploads/247477/homemade-extension-cord-reel.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-extension-cord-reel">Extension Cord Reel</a> <span> by <a href="https://www.homemadetools.net/builder/RCTURKA">RCTURKA</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/electrical'>electrical</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
ah yes, derate a LOT if still on the reel, used in the sun, or you're just accident prone
"Remember to be careful using reels with anything that draws a bit of current though" - I got a major dressing down from an electrical design engineer I know when he saw me using a coiled up extension cord with only a few feet run out. Something I had done for many years without a thought. Induction apparently causes a lot of overheating, fires and shorts, something I'd not heard about and nobody had ever pointed out.
Toolmaker51 it may have been when the tool stopped working? :headscratch:
A big part is just heat dissipation. Wires are rated to run in free air.
So, under USA code:
Derate if more than a few wires in a raceway (conduit/wire tube).
Derate if in a warm area.
Derate if load is over 80% duty cycle.
Derate if inspector is having a bad day.
So, when we installed our off-grid solar here I had to use rigid conduit (water pipe) but since it goes through the attic to the roof the wires had to be derated 20% for heat. Solar panels are assumed to be 100% duty cycle, derate another 20%.
Also the ground wire can not have any junctions from the stake to the battery controller. I just slipped by not having to use a ground wire the same size as the battery cables, that would have HURT my wallet!