Almost Finished with 2" x 72" Belt Grinder Build

[bobs409]

Nice! I did one myself but made all the pieces myself including the wheels! It added to the time line but was a lot of fun. My 2 x 72 can be seen here:
2 x 72 inch Revolution Belt Grinder (aka The Metal Muncher!)

If your like me, next you will be building all kinds of accessories to go with it. I did everything but a buffing wheel and surface grinding attachment. I too did the 7 inch wheel and it's CRAZY fast! Too fast I think, I usually run only about 1/2 way.

I see your trying to control the dust. That's a big issue with these! I take mine outside every time I want to use it which is a pain. I was thinking of building a tent over mine but I like your idea of a box. Rig in a shop vac and you might just have something there!

Well, don't let me keep you, get back to work. lol

[tmate3]

Bobs409:

Am I correct in assuming that you have or had a 409 Chevy?

[bobs409]

Bobs409:

Am I correct in assuming that you have or had a 409 Chevy?

Have. I have a 63 400hp 409 engine that I put in my 66 Chevelle SS. I'm also the owner of the 348-409.com website. We have a great forum for these old Chevy's.

[tmate3]

Have. I have a 63 400hp 409 engine that I put in my 66 Chevelle SS. I'm also the owner of the 348-409.com website. We have a great forum for these old Chevy's.

Back in the sixties I had a '62 Impala that came with a 327/300. I swapped a guy whose wife was complaining for his '63 409/425 engine. Miss it every day.

[Saltfever]

(edit . . . ) With a 7" drive wheel top speed is just over 6,500 sfpm (surface feet per minute). I haven't tried grinding anything yet above maybe 3,000 sfpm, but with a 36 grit belt even that was scary fast at removing steel.

I have always used the yardstick of 4,000-4500 max FPM and 1HP per inch of belt width. It is a beautiful and versatile grinder design, but as you indicate, 74 MPH seems a bit much.