Free 186 More Best Homemade Tools eBook:  
Get tool plans

User Tag List

Results 1 to 8 of 8

Thread: 4 strokes of the combustion cycle in a single crankshaft revolution

  1. #1
    Supporting Member jimfols's Avatar
    Join Date
    Sep 2015
    Location
    Ontario Calif USA
    Posts
    853
    Thanks
    2,150
    Thanked 547 Times in 288 Posts

    4 strokes of the combustion cycle in a single crankshaft revolution


    186 More Best Homemade Tools eBook
    Jim

  2. The Following 8 Users Say Thank You to jimfols For This Useful Post:

    asterix (Feb 8, 2021), baja (Feb 9, 2021), EnginePaul (Feb 10, 2021), Home-PC (Feb 15, 2021), KustomsbyKent (Feb 13, 2021), mwmkravchenko (Feb 8, 2021), nova_robotics (Feb 8, 2021), Rangi (Feb 9, 2021)

  3. #2
    Supporting Member
    Join Date
    Nov 2017
    Posts
    398
    Thanks
    38
    Thanked 206 Times in 113 Posts

    Elizabeth Greene's Tools
    Is it noisy? It looks like the roller bearing on the intake/exhaust piston drive cam will have to lift off that cam and land on it with every revolution.

    2,000+ Tool Plans

  4. The Following User Says Thank You to Elizabeth Greene For This Useful Post:

    nova_robotics (Feb 8, 2021)

  5. #3
    Supporting Member
    Join Date
    Sep 2018
    Posts
    2,346
    Thanks
    11,132
    Thanked 1,219 Times in 664 Posts

    nova_robotics's Tools
    It's neat, but I don't see the benefit. It's like an approximation of the Atkinson cycle with full stroke expansion and a reduced volume intake stroke, but with tons more parts and with a really unreliable looking engagement/disengagement of the two pistons. Also tons more rotating mass. And lots of weird new harmonic balancing issues. Why do this over Atkinson?

  6. #4
    Supporting Member
    Join Date
    Oct 2014
    Posts
    40
    Thanks
    1
    Thanked 44 Times in 15 Posts

    Liquidhandwash's Tools
    If you look closely it has 3 conrods and the wrist pins are only held on one side with the smaller conrod cutting through the middle. Also, the small wrist pin would have to be very small. I would say it would not run for very long if at all.

  7. The Following User Says Thank You to Liquidhandwash For This Useful Post:

    nova_robotics (Feb 8, 2021)

  8. #5

  9. #6
    Supporting Member marksbug's Avatar
    Join Date
    Apr 2016
    Posts
    1,938
    Thanks
    774
    Thanked 382 Times in 308 Posts
    so whats pulling it down for the intake stroke?? more useless stuff.

  10. #7
    Supporting Member marksbug's Avatar
    Join Date
    Apr 2016
    Posts
    1,938
    Thanks
    774
    Thanked 382 Times in 308 Posts
    dont a 2 stroke already do this....with much less complicated parts.

  11. #8
    Supporting Member marksbug's Avatar
    Join Date
    Apr 2016
    Posts
    1,938
    Thanks
    774
    Thanked 382 Times in 308 Posts
    it's a time machine....wasted time finding ways to waste time while wasting time, perhaps they should put some watch hands on it so it could count all the wasted time....just messing as this type of time isant wasted as it may just turn into something someday or spawn a bright idea while somebody is wasting time looking at it. and thats what this forum is awesome for, spawning new ideas and expanding on the ones you or somebody else has/had/will have. like the girls of tick tok...hmm that gives me an idea!!!! and just when you thing you've seen it all...hear comes marksbug.



    2,000+ Tool Plans
    Last edited by marksbug; Feb 15, 2021 at 02:41 PM. Reason: popcorn

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •